Menu
Cart 0
2 1/4" 2.25" Butt Joint Band Exhaust Clamp Bear River Quality Stainless

2 1/4" 2.25" Butt Joint Band Exhaust Clamp Bear River Quality Stainless

Bear River Converters

  • $11.72
  • Save $0.93


 This listing is for one (1) Butt Joint Clamp in the size described.   

All other clamps pictured are for style reference only! 

 

Dimensions: 

Bear River BJC225SS 2.25" (2 1/4") Butt Joint Clamp 

Seals Butt Joint Connections Where Needing to Connect 2.25" ( 2 1/4") OD Pipe to 2.25" (2 1/4") OD Pipe 

Minimum Diameter: 2.21875" (2 7/32") 

Maximum Diameter: 2.25" (2 1/4") 

Overall Length: 3" 

Height: 3.125" (3 1/8") 

Hex Nut: 14mm Metric 

Material: T304 Stainless Steel w/ Zinc-plated Mild Steel 

Hardware Lifetime Warranty* 



What you need to know about exhaust clamps:


U Bolt “Economy” Clamp
 
The most common type of clamp is the U-bolt or saddle clamp. The most cost effective of all the clamps, people choose this one most often because it does a good job at a low cost.

 

 

"Band" Clamp

Band clamps utilize a strong band which is tightened around the joint.  Reaction block construction provides 360º equal distribution of stretching force for a complete seal. Combines joints without crimping, grooving, or distorting the pipe. Depending on the design, this type of clamp is less prone to leaks, and is a good way to secure parts together without the use of welds. 

 

 

“Lap-Joint” Band Clamp

Lap-joint clamps are best when cosmetic appearance is important, as well as serviceability of the joint.  This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars.  This type of clamp is much easier to separate should a component ever need to be removed or replaced, so if disassembly is important, this clamp would be preferred over band or saddle clamps.  This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.  

This clamp will not work properly if installed too closely to a bend.

 

 

“Butt-Joint” Band Clamp

Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.

Reaction block and forced bar for complete inner circle seal and conforms to the pipe upon installation.This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.  

This clamp will not work properly if installed too closely to a bend.

 


We Also Recommend

QUESTIONS & ANSWERS

Ask a Question
  • Hi, You have very and good description listed for the coupler joints, however the most important one is the thickness which is not listed on any, realities makes no sense to be overlooked. With that said, what is the thickness for the ES225SS EasySeal Torctite Butt-Joint Exhaust Clamp Coupler Stainless? Thanks

    Thanks for your inquiry! These clamps are very thin and maleable at approx 1/32"

Sale

Unavailable

Sold Out