1 7/8" Exhaust Muffler Clamp U-Bolt Saddle Style For 1.875" Pipe
This listing is for one (1) U Bolt Clamp in the size described.
All other clamps pictured are for style reference only!
Crushes to Seal Lap Joint Connections Where 1.875" (1 7/8") ID Pipe Slides Over 1.875" (1 7/8") OD Pipe
Inside Diameter: 2.0625“ (2 1/16")
Outside Diameter: 2.71875“ (2 23/32")
Length: 3.125” (3 1/8")
Saddle Thickness (May Vary) Approx: .625” (5/8")
Rod Thickness: .3125” (5/16")
Hex Nut: .5625" (9/16")
Material: Mild Steel
Style of "Saddle" May Vary
5 Year/50,000 Mile Warranty*
Band clamps utilize a strong band which is tightened around the joint. Reaction block construction provides 360º equal distribution of stretching force for a complete seal. Combines joints without crimping, grooving, or distorting the pipe. Depending on the design, this type of clamp is less prone to leaks, and is a good way to secure parts together without the use of welds.
“Lap-Joint” Band Clamp
Lap-joint clamps are best when cosmetic appearance is important, as well as serviceability of the joint. This would include exhaust tips, mufflers, catback systems, racing exhaust, and show cars. This type of clamp is much easier to separate should a component ever need to be removed or replaced, so if disassembly is important, this clamp would be preferred over band or saddle clamps. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.This clamp will not work properly if installed too closely to a bend.
“Butt-Joint” Band Clamp
Butt-joint clamps are also a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.
Reaction block and forced bar for complete inner circle seal and conforms to the pipe upon installation. This type of clamp does require that the sections being clamped have sufficient lengths of straight pipe leading into it.
This clamp will not work properly if installed too closely to a bend.
We Also Recommend
1 7/8" 1.875" Band Exhaust Clamp Heavy Duty Bear River Quality Steel
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.